Job Connect

Responsibilities of the position:
Some of the job responsibilities will include:
• Set up machinery and ensure all materials are readily available.
• Effectively monitor production equipment
• Use machine to mark ID lines onto the wires.
• Inspect wires for size, shape, and any defects.
• Take measurements of wire using micrometer or caliper
• Maintain software for wire processing machines.
• Performs other related duties and responsibilities, on occasion, as assigned.

Preferred Skills:
• Able to read and follow schematics.
• Attention to detail.
• Excellent communication skills
• Analytical mind and problem-solving aptitude
• Good communicator capable of working well in a team.
• Ability to handle high-pressure situations with a great attitude.
• Ability to work independently under tight deadlines.
• Experience with cable harness assembly.
• Administrative Writing Skills & Microsoft Office Skills (Word, Excel, Power Point, Outlook)

Physical and Daily Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and listen. The employee is frequently required to use hand tools (power and manual), feel, and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. This position is full time, working hours vary from 5:00 am – 3:30 pm and can include daily overtime and weekends, as needed. Training for this position will be conducted and may take up to 30 days to complete.

Responsibilities of the position -
Some of the job responsibilities will include:
• Routes and ties wires to form wire harness used in electrical and electronic equipment or
systems:
• Reads instructions, such as work orders, diagrams, and wire lists to determine materials needed
and sequence of assembly.
• Selects wires of specified color, marking, or length, and loops wires between guide pegs on
harness board, following color-coded lines or sequential numbers on board or diagram.
• Wraps and ties wires together at designated points to form harness, manually or using tie-wrap
gun.
• May attach ends of wires to components, plugs, or terminal strip, using soldering iron or
crimping device.
• May insert cable in plastic tubing to protect cable from dust and moisture.
• May test wiring continuity, using continuity tester.
• Other duties as assigned by the area supervisor.

Preferred Skill:
• Experience as a Wire Harness Prepper or related field a plus but will train.
• Able to work in a fast-paced environment.
• Competency in basic math skills, such as adding and subtracting.
• The ability to read, understand, communicate, and interpret written and verbal instructions,
work documentation, policies, practices, etc., in the English language.
• The ability to bend, twist, and stand for periods of up to 8 or 10 hours.

Physical and Daily Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to use hand tools (power and manual), feel, and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. This position is full time, working hours vary from 5:00 am – 3:30 pm and can include daily overtime and weekends, as needed. Training for this position will be conducted and may take up to 30 days to complete.

Requirements and duties:
• Assemble and build pallets.
• Assemble and build crates.
• Experience on using a pneumatic nail gun.
• Knowledge of how to use a vertical panel saw and miter saw is a must.
• Must be able to use hand tools.
• Cleaning the shop area.
• Packing pallets.
• Must be safety oriented.
• Must know how to read a tape measure.
• Must be able to work on a team or independent but be self-motivated.
• Must meet daily quota requirements.
• Operate a Forklift, some experience is preferred, but we will train.

Specific qualifications:
• Superior attention to detail
• Ability to lift 50 pounds or more.
• Ability to pass a background check and drug screen.
• Background in manufacturing or warehouse work a plus
• Must be able to work overtime.

The above statements are intended to describe the general nature and level of work being performed. All employees may be required to perform duties outside their normal responsibilities, as needed.

Physical and Daily Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee may be required to stand, climb ladders, use hand tools (power and manual), feel and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. This position is full-time, working hours vary between 6:00 AM to 2:30 PM and can include daily overtime and weekends, as needed. HH Technologies and its subsidiaries are equal opportunity employers and do not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, or veteran status.

Certification on pipe welding is required. 




Job description

Tasks:

Operate safety equipment and use safe work habits.
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
Knowledge of preheating and post weld heat treatment of metals.
Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
Knowledge of various types of pipe welding including: GMAW, FCAW, GTAW carbon, GTAW low-alloy and stainless, GTAW nickel, GTAW followed by SMAW of chrome-moly, GTAW aluminum, GMAW aluminum plate and pipe.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
Mark or tag material with proper job number, piece marks, and other identifying marks as required.
Preheat workpieces prior to welding or bending, using torches or heating furnaces.
Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
Detect faulty operation of equipment or defective materials and notify supervisors.
Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
Hammer out bulges or bends in metal workpieces.
Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
Signal crane operators to move large workpieces.
Use fire suppression methods in industrial emergencies.
Estimate materials needed for production and manufacturing and maintain required stocks of materials.
Have a working knowledge of QA/QC as it relates to welding.

Contractor Service & Fabrication, Inc. (CSFCO) is seeking Pipefitters to join our team. 


Looking for qualified Pipe Fitters.

Job Description

Lay out full scale drawings of pipe systems, supports, or related equipment, according to blue prints.
Have knowledge of various types of rigging equipment and the ability to use them properly.
Interpret pipefitting standards, codes, and specifications.
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
Measure and mark pipes for cutting or threading.
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
Plan pipe system layout, installation, or repair, according to specifications.
Select pipe sizes, types, or related materials, including supports, hangers, or hydraulic cylinders, according to specifications.
Be able to identify the different types of valves and how to install them.

Knowledge, Tools, & Technology used for this occupation:

HDPE Experience
Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Design — Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models.
Mathematics — Knowledge of mathematics including tables of equivalents and trigonometry.

Preferred Experience & Qualifications:

Must have experience in underground Piping
Must have experience in fusion of HDPE Piping.
Knowledge of operating fusion machines.
Degree and/or Certificate in Technical Training is preferred.




Benefits Include:

BCBS

Paid Vacations

Paid Holidays

401k Company Match

Job Type: Full-time

• Clean the interior of buildings including floors, carpet, rugs, windows and walls
• Disinfect commonly used items like desks, door handles, office tools and phones
• Maintain cleaning inventory, placing orders for new products when needed
• Empty trash and recycling bins
• Stock and maintain supply rooms
• Perform minor repairs on machinery, equipment and tools
• Vacuum, sweep and mop floors
• Clean and maintain restrooms
• Washing and clean windows and mirrors
• Notify supervisors of unsafe conditions
• Operate floor scrubbers and other equipment
• Dust furniture and fixtures

Job Duties:

Has detailed knowledge and abilities to recognize and eliminate hazards within an industrial environment. Has strong equipment preventative maintenance knowledge & skills.

Has detailed knowledge and clear understanding of all necessary tools, including precision measurement equipment utilized relating to Mechanical Maintenance.

Have good written and oral communication skills and the ability to produce paperwork necessary for proper documentation of task being performed. Also, has the ability to oversee others for accuracy in all documentation generated. Also, ability to produce, clear, precise, documents and reports able to communicate well both internally and externally.

Has an advanced level of construction related mathematic skills and the ability to utilize mathematic equations and formulas to solve layout and placement task.

Has detailed knowledge and understanding of mechanical drawings, process/piping,
instrumentation flow diagrams, isometric and orthographic drawings and the ability to thoroughly interpret and convey all information contained within drawings.

Ability to do take-offs and piping equipment sketches.

Has detailed understanding of pumps and drive systems alignment and has advance skills in troubleshooting, diagnosing, and repairing malfunctions of all components.

Has ability to properly align pumps and rotating equipment.

Has advanced knowledge of ferrous and non-ferrous piping systems and the ability to remove, repair, and install all components within the systems.

Has detailed knowledge and understanding of welding processes and has advanced level skills to perform welding task using SMAW, GMAW, and FCAW processes.

Has advanced knowledge and understanding of valves and the ability to troubleshoot and identify malfunctioning components as well as the ability remove, repair and re-install all types of valves available. 

Has knowledge and ability to understand the purpose of bearings and understands the physical properties of bearing and how to minimize affects which contribute to failure. Also, ability to monitor and predict failure.

Has advanced knowledge and understanding of hydraulic systems and associated components.

Has advanced level knowledge and experience utilizing test instruments for maintaining equipment within an industrial facility.

Has advanced knowledge and understanding of material handling equipment utilized within an industrial facility. Also, ability to trouble-shoot and maintain robotic systems.

Has advanced knowledge and understanding of rigging equipment and proper usage methods utilized within an industrial facility.  Ability to calculate loads to determine proper lifting methods and equipment.

Understands theoretical concept of lubrication and has detailed knowledge and understanding of proper lubrication methods utilized within an industrial facility.

Has an advanced understanding of material control methods and ability to adhere to procedures.

Has a strong knowledge of mechanical seals and ability to install, monitor and repair the same.

Has knowledge of metal lathes, drill presses, boring equipment.

Understands the operation and maintenance of compressors.


Job Type: Full-time
Benefits Include:

Craft Retention Bonuses

BCBS Health Insurance

Dental & Vision Insurance

Short Term Disability

Paid Time Off

401k with employer matching

JOB OVERVIEW:

Support and consistently reinforce the Mission and Core Values of M&D Mechanical Contractors, Inc. A HVAC Sheet Metal Installer specializes in designing, assembling, installing, and repairing sheet metal duct systems and equipment. This includes ductwork for HVAC systems as well as various components for industrial, and commercial applications. Using tools and machinery, they install metal duct into intricate and functional structures, ensuring precise measurements and adherence to specifications and codes. With a focus on safety and craftsmanship, sheet metal mechanics often collaborate with other tradespeople to integrate their products into the structural design.

NO PERDIEM OR RELOCATION IS AVAILABLE. SUCCESSFUL CANDIDATE WILL RESIDE WITHIN 60-MILES OF DECATUR, AL.

FUNCTIONAL DUTIES & REQUIREMENTS:

Sheet metal mechanics are professionals who specialize in installing products made of thin sheet metal, such as ducts used in heating and air conditioning systems. Here are the general and specific duties associated with sheet metal mechanics:

Safety Compliance: Following all safety guidelines and using protective equipment to prevent injuries from sharp metal, machinery, or other hazards.
Reading Drawings: Interpreting and understanding drawings, sketches, or building plans to determine material requirements and installation processes.
Measuring and Cutting: Using various tools to measure, cut, bend, and shape sheet metal according to fit or offset.
Installation: Fastening pieces of metal together using various tools and techniques such as duct seal each joint, bolting sections with collars or flanges
Maintenance and Repair: Repairing damaged metal sections or replacing parts as needed.
Quality Assurance: Inspecting and testing installed sheet metal systems to ensure they meet specifications and code.
Equipment Maintenance: Regularly inspecting and maintaining equipment and tools.
Communication: Collaborating with other construction professionals, such as plumbers, electricians, and general contractors.


JOB SPECIFIC DUTIES:

Installing sheet metal ducts, vents, or partitions in buildings and other structures according to SMACNA standards.
Sketch duct system transition and connections for fabrication with supervision
Hang duct systems securely and level to optimize system efficiency
Fitting and joining duct sections using various techniques, ensuring secure and airtight connections.
Using specialized equipment to ensure that HVAC systems work efficiently and provide a safe and comfortable indoor environment.
Adjusting sheet metal installations to optimize performance and balance air supply per specifications.
Ensuring the systems meet industrial standards for safety and efficiency.


QUALIFICATION STANDARDS:

Minimum of high school education or GED equivalent, or trade school
Previous HVAC installation experience preferred
Required to read and write English, follow verbal instructions, and use simple math
Basic understanding of HVAC systems and components
Ability to read and comprehend project drawings and components
Must be detail oriented and organized
Must be able to self-check own work to ensure accuracy and completeness
Must be able to manage and prioritize multiple task and schedule requirements
Strong TEAM player


PHYSICAL INVOLVEMENT:

Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction.



MENTAL INVOLVEMENT:

Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures, and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked, following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards.



WORK ENVIROMENT FACTORS:

Location: industrial construction sites and/or office environment
Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways
Climatic/Environmental Conditions at Job Site: predominately indoor climate; various noise levels caused by tools, machinery, equipment, etc., potential exposure to chemical substances.


M&D Mechanical Contractors, Inc. is an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.


Equal Opportunity Employer, including disabled and veterans.

JOB OVERVIEW:

A Mechanical Contractor Plumber specializes in the installation, maintenance, and repair of plumbing systems in large-scale commercial and industrial settings. These professionals work to ensure that all plumbing systems, including water supply, waste disposal, and gas lines, function efficiently and safely within a building or complex. Their expertise covers a range of sophisticated plumbing systems from basic water supply networks to complex HVAC using copper, PVC, cast iron, screw pipe and HDPE.


FUNCATIONAL DUTIES & REQUIREMENTS:

System Analysis: Evaluating blueprints, plans, and specifications to understand the plumbing requirements of a particular project.
Installation: Set up advanced plumbing systems, including those integrated into HVAC and inert (medical) gas using copper, PVC, cast iron, screw pipe and HDPE
Maintenance: Inspect and test sophisticated plumbing installations to ensure they function optimally.
Troubleshooting: Identify and diagnose issues including resolution within complex plumbing networks.
Safety Protocols: Adhering to safety regulations and standards, ensuring the safety of oneself and others on the job site.
Regulation & Code Compliance: Ensure all installations and repairs comply with local, state, and national codes and standard requirements.
Collaboration: Working closely with other tradespeople to maintain project execution
Documentation: Assist with keeping records of work performed, materials used, and other relevant data.
Communication: Engage with customers to gather requirements, provide updates and offer solutions.


JOB SPECIFIC DUTIES:

Requirements: Interpret drawings, schematics, and technical specifications including codes and regulations.
Piping & Valve Systems: Install and maintain specialized piping and valve systems designed for commercial and industrial applications from copper, PVC, cast iron, screw pipe and HDPE
Soldering: Join and seal sections of pipes using soldering and swaging techniques.
System Integration: Coordinate with other trades, such as electrical or HVAC contractors, to ensure plumbing systems integrate seamlessly.
Equipment Calibration: Install, set up and calibrate specialized equipment like pumps, boilers, and heaters.
Water Treatment Systems: Install and repair water purification and treatment systems as required in industrial contexts.
Gas Systems: Install and repair gas lines and related systems.
System Flush: Cleaning and flushing the system after installation to remove any debris or contaminants.
Inspection: Perform site inspections of plumbing systems to meet safety and regulatory requirements.
Pressure Tests: Conduct rigorous head or pressure tests to validate the integrity of plumbing and gas installations.
Material Selection: Recognize appropriate materials based on usage and specific requirements of the project, to ensure durability and safety.
Team Leadership: Mentor apprentices to ensure quality workmanship.


QUALIFICATION STANDARDS:

Minimum of high school education or GED equivalent, or trade school
Completed M&D apprentice program - Preferred
Previous plumbing experience
Required to read and write English, follow verbal instructions and use simple math
Excellent written and verbal communication skills
Basic understanding of plumbing systems, components
Ability to read and comprehend project drawings components and materials
Must be detail oriented and organized
Must be able to self-check own work to ensure accuracy and completeness
Must be able to manage and prioritize multiple task and schedule requirements
Strong TEAM player


PHYSICAL INVOLVEMENT:

Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction.



MENTAL INVOLVEMENT:

Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures, and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked, following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards.



WORK ENVIROMENT FACTORS:

Location: industrial construction sites and/or office environment
Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways
Climatic/Environmental Conditions at Job Site: predominately indoor climate; various noise levels caused by tools, machinery, equipment, etc., potential exposure to chemical substances.


M&D Mechanical Contractors, Inc. is an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.




Equal Opportunity Employer, including disabled and veterans.
View Company Information

To see other positions, click here.